iopge.blogg.se - Multiviewer hdmi

#Multiviewer hdmi 1080p#
#Multiviewer hdmi full#

Supports Ultra-HD resolutions up to 3840x2160 YUV 4:4:4, and HDTV resolutions to 1080p features supported: HDMI 1.4, Up to 36-bit Deep Color, RGB, YCbCr 4:4:4, YCbCr 4:2:2, Dolby, LPCM, DTS, Bandwidth up to 6.75 Gbps

#Multiviewer hdmi full#

Quad, Dual, Picture in Picture, and Full Screen display modes.

It is capable of displaying the video signals in quad, dual, PiP, or full screen mode. WARNING: Cancer and Reproductive Harm - SPLITMUX® Low-Cost 4K HDMI Quad Screen Multiviewer allows Ultra-HD 4Kx2K 30Hz video from four different sources to be simultaneously displayed on a single HDMI monitor in real time.

Includes screws and additional hardware to mount the ANI-QUAD-MINI into a standard 19in EIA rack.

Works only with the ANI-QUAD-MINI and ANI-QUAD-LITE.

Optional Rack Mount Bracket (ANI-QUAD-MINI-RM).

Base Unit: Receiver: Input: 110VAC (US/EU standards, CE/FCC/UL certified).

Relative Humidity: 20~90% RH (non-condensing).

Weight: 2.0 lb (Unit only) / 4.2 lb (Net).

Power Supply: 12V 2.5A DC Power Adaptor (Main Unit) / 5V 1A DC Power Adaptor (Receiver Unit).

IR Control of Connected Display: Control the remote display with the display IR remote via the IR receiver on the multiviewer and an IR transmitter connected to the remote unit.

IR Control of Connected Sources: Control with the source IR remote using the built-in IR receiver on the multiviewer or via an IR transmitter connected to the multiviewer and an IR receiver connected to the remote unit.

IR Control of the Multiviewer: Control with the included IR remote using the built-in IR receiver on the multiviewer or via an IR receiver connected to the remote unit.

(1) coax connector for local SPDIF audio.

(1) RJ45 connector for CATx cable to remote unit.

The ANI-QUAD-MINI is NOT compatible with EZ-45 connectors.

Turn ARC off to play audio from the multiviewer source, to the connected speakers.

Turn ARC on to play audio from a HDTV with ARC support, to the connected speakers.ARC (Audio Return Channel) support at the receiver unit via a coax SPDIF output for speakers.Supported output resolutions can be selected.Features coax SPDIF audio outputs at the multiviewer and receiver.Supports simultaneous local and remote HDMI output.Adjust output video brightness, contrast, color and sharpness.Cascaded outputs can be extended using the remote unit as long as the combined total CAT6/6a/7 cable length is between all levels of the cascade, and does not exceed 250 ft.Each unit in the cascade must be configured and controlled individually.Cascade multiviewers to display video from any number of video sources on (1) screen.Bi-directional IR control from multiviewer and remote unit locations.Controls the multiviewer through front panel buttons, IR remote or Graphical User Interface (GUI) via RS-232.Switches audio independently from the video when connected to the HDMI sources in Quad mode.(4) channel non-mixing or (1) channel mixing stereo with 16, 20 or 24bit uncompressed PCM audio.Inputs: 24, 30 and 36bit / xvYCC, sRGB and YCbCr.Supports HDTV resolutions up to 1080p and computer resolutions up to 1920x1200.Independent video in to video out resolution In PIP mode, the full screen display of (1) of the (4) video sources is accompanied by (3) small images (thumbnails) of the (3) other video sources on the right hand margin of the screen allowing simultaneous monitoring.In full screen mode, (1) of the (4) video sources is displayed in full screen size at maximum resolution.Fluid, real-time video performance with 60 frames per second (fps) in all (4) quadrants.In quad mode, the screen is split into (4) fields of equal size each displaying the entire contents of (4) different video sources.

Quad, Picture in Picture and Full Screen display modes.Allows HDMI Audio/Video and IR signals to be transmitted over a single CAT5e/6 cable.IR system allows for control of the source at the display end.Control provided with front panel buttons, IR remote, RS-232 and various third party controllers.Supports scaler Up/Down functions and digital audio formats LPCM/AC3/DTS.Supports up to 1080p High Definition resolution and is HDMI 1.3a and HDCP 1.2 compliant.4x1 Quad Multi-viewer and seamless switch with multiplexed HDMI (4) Inputs and (1) Output.The audio/video output can be extended up to 250ft* away via a single CAT6/6a/7 cable. It is capable of displaying the video sources in Quad, PiP or Full Screen modes. The ANI-QUAD-MINI HDMI Quad Screen Multiviewer allows you to simultaneously display real-time HDMI/DVI video from (4) different sources on a single monitor.